2.6.35.10-landisk.1準備完了(swapパーティション不認識問題解決)

USL-5P debian-sh

　新年おめでとうございます。
　debian-superhMLにて(iwamatsuさんより)CONFIG_DEVTMPFSとCONFIG_DEVTMPFS_MOUNTをセットすると、swapパーティション不認識問題が解決するとのアドバイスを頂きました。
　カーネルの準備ができましたので、テストします。
(logが鬱陶しいかも知れませんが、勘弁してください)

SH IPL+g version 0.9, Copyright (C) 2000 Free Software Foundation, Inc.

This software comes with ABSOLUTELY NO WARRANTY; for details type `w'.
This is free software, and you are welcome to redistribute it under
certain conditions; type `l' for details.

2002/09/09 Making.  2004/09/08 I-O DATA NSU Update.
266:133:33 on base clock 22.22MHz and SDRAM 4 burst. CF boot.

PCIC initialization done.
MASTER:48bit LBA mode non support
Disk drive detected: HMS360402D5CF00 DN2OC60G             N2GRN0HA
LBA: 003D0800
DiskSize: 2047868928Byte
PIO MODE1
> b
Set Transfer Mode result: 50
Initialize Device Parameters result: 50
IDLE result: 50
LILO boot:

Loading debian(sid)..................................done.
ﾉﾁﾅﾅ5)ｽｽﾑE?ｵﾍ・)srrj=U9Q}I==Q}I=91eｵﾁﾁﾁﾁﾁﾁﾁﾅ5)srr5%M-}1Mｵﾁﾁﾁﾁﾁﾁﾁﾁ5)srrzI%}I==Q}Yﾅuｹ55%=ﾁｱ5)loop: module loadedｽｱmﾑﾑ藪QI}MQIQｵﾁﾁﾁﾁﾁﾁﾁﾁ5)srrJ9%QI}M%iｵﾁﾁﾁﾁﾁﾁﾁﾁ5)k
scsi0 : pata_platform･ﾍ?･5)ﾉ･ﾍ鯔ﾕﾙ｡ｽﾉﾉ駲ﾑﾁ袢)｣5)衽?5)ｫAｵ1･ﾑ｡ﾍ｡ﾑﾍｱｹﾑﾉ･ﾍ鯔ﾕﾙ｡ｽﾉﾉ駲
ata1: PATA max PIO0 ioport cmd 0xc0000040 ctl 0xc000002c irq 10ｽﾕｹ?ｲｵｱｱｽ
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
PCI: Enabling device 0000:00:00.0 (0000 -> 0003)
8139cp 0000:00:00.0: eth0: RTL-8139C+ at 0xfd002000, 00:a0:b0:6c:e9:cd, IRQ 5
PCI: Setting latency timer of device 0000:00:00.0 to 64
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
PCI: Enabling device 0000:00:02.2 (0000 -> 0002)
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: Enabling legacy PCI PM
ehci_hcd 0000:00:02.2: irq 5, io mem 0xfd002100
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 7, io mem 0xfd000000
ata1.00: CFA: HMS360402D5CF00, DN2OC60G, max UDMA/33
ata1.00: 3999744 sectors, multi 0: LBA
ata1.00: configured for PIO
scsi 0:0:0:0: Direct-Access     ATA      HMS360402D5CF00  DN2O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3999744 512-byte logical blocks: (2.04 GB/1.90 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda:
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 8, io mem 0xfd001000
 sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI removable disk
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
mice: PS/2 mouse device common for all mice
rs5c313 rs5c313: rtc core: registered rs5c313 as rtc0
sh_tmu sh_tmu.0: kept as earlytimer
sh_tmu sh_tmu.1: kept as earlytimer
push-switch: version 0.1.1 loaded
TCP cubic registered
NET: Registered protocol family 17
rs5c313 rs5c313: setting system clock to 2011-01-05 12:35:47 UTC (1294230947)
EXT2-fs (sda3): warning: mounting ext3 filesystem as ext2
VFS: Mounted root (ext2 filesystem) readonly on device 8:3.
devtmpfs: mounted
Freeing unused kernel memory: 96k freed
蒺J9%Q・?ﾉﾍ･ｽｹ?矣       ｽｽﾑ･ｹ55)Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevdudev[824]: starting version 164
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...done.
Setting parameters of disc: (none).
Activating swap...Adding 125048k swap on /dev/sda2.  Priority:-1 extents:1 across:125048k
done.
Checking root file system...fsck from util-linux-ng 2.17.2
/dev/sda3: clean, 41880/226688 files, 274038/453065 blocks
done.
Cleaning up ifupdown....
Setting up networking....
Loading kernel modules...done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux-ng 2.17.2
done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files....
Configuring network interfaces...eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
done.
Cleaning up temporary files....
Setting up ALSA...done (none loaded).
Setting kernel variables ...error: "net.ipv6.bindv6only" is an unknown key
failed.
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Starting enhanced syslogd: rsyslogd.
Starting btnctrl/dev/ledctrl open error...
.
Starting periodic command scheduler: cron.
address=fe2440d8
data1=ff
address=fe2440d8
data1=03
gio2 write done.
data1=ff
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd.

Debian GNU/Linux 6.0 landisk ttySC1

landisk login:

　カーネルを更新しただけでは、swapを認識しませんでした。起動したシステム上で、再度mkswapしたところ認識できました。
　目出度いです。問題解決です。