2.6.35.9-landiskカーネル動作テスト
2.6.35.9-landisk起動しました。
mitsuoさんが確認された(sda1,sda2(swapパーティション)の不認識)問題も確認できました。
この起動確認時、PuTTYを使うとシリアルコンソールに
irq 40: nobody cared (try booting with the "irqpoll" option)
がでました。
tera termではでません。ターミナルソフトにも問題があった様です。
ブートオプションを115200bpsにしたのは、上記が出難かったからなのですが、これで原因の一つが分かりました。
ノチナチ5)ススムE?オヘ・)srrj=U9Q}I==Q}I=91eオチチチチチチチナ5)srr5%M-}1Mオチチチチチチチチ5)srrzI%}I==Q}Yナuケ55%=チア5)loop: module loadedスアmムム藪QI}MQIQオチチチチチチチチ5)srrJ9%QI}M%iオチチチチチチチチ5)k scsi0 : pata_platform・ヘ?・5)ノ・ヘ鯔ユル。スノノ駲ムチ袢)」5)衽?5)ォAオ1・ム。ヘ。ムヘアケムノ・ヘ鯔ユル。スノノ駲 ata1: PATA max PIO0 ioport cmd 0xc0000040 ctl 0xc000002c irq 10スユケ?イオアアス 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) PCI: Enabling device 0000:00:00.0 (0000 -> 0003) 8139cp 0000:00:00.0: eth0: RTL-8139C+ at 0xfd002000, 00:a0:b0:6c:e9:cd, IRQ 5 PCI: Setting latency timer of device 0000:00:00.0 to 64 usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver PCI: Enabling device 0000:00:02.2 (0000 -> 0002) ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: Enabling legacy PCI PM ehci_hcd 0000:00:02.2: irq 5, io mem 0xfd002100 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver PCI: Enabling device 0000:00:02.0 (0000 -> 0002) PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 7, io mem 0xfd000000 ata1.00: CFA: HMS360402D5CF00, DN2OC60G, max UDMA/33 ata1.00: 3999744 sectors, multi 0: LBA ata1.00: configured for PIO scsi 0:0:0:0: Direct-Access ATA HMS360402D5CF00 DN2O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 3999744 512-byte logical blocks: (2.04 GB/1.90 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected PCI: Enabling device 0000:00:02.1 (0000 -> 0002) PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 8, io mem 0xfd001000 sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI removable disk hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected mice: PS/2 mouse device common for all mice rs5c313 rs5c313: rtc core: registered rs5c313 as rtc0 sh_tmu sh_tmu.0: kept as earlytimer sh_tmu sh_tmu.1: kept as earlytimer push-switch: version 0.1.1 loaded TCP cubic registered NET: Registered protocol family 17 rs5c313 rs5c313: setting system clock to 2010-12-13 06:35:15 UTC (1292222115) EXT3-fs (sda3): recovery required on readonly filesystem EXT3-fs (sda3): write access will be enabled during recovery EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda3): recovery complete EXT3-fs (sda3): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:3. Freeing unused kernel memory: 96k freed 蒺J9%Q・?ノヘ・スケ?矣 ススム・ケ55)Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...done. Activating swap...done. Checking root file system...fsck from util-linux-ng 2.17.2 /lib/init/rw/rootdev: clean, 11686/226688 files, 117105/453065 blocks (check in 2 mountsEXT3-fs (sda3): ) done. using internal journal Cleaning up ifupdown.... Setting up networking.... Loading kernel modules...done. Activating lvm and md swap...done. Checking file systems...fsck from util-linux-ng 2.17.2 done. Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 done. Cleaning up temporary files.... Setting kernel variables ...error: "net.ipv6.bindv6only" is an unknown key failed. 5%9%Q・ケム?ケノユケア?ア鯔55)Using makefile-style concurrent boot in runlevel 2. Starting enhanced syslogd: rsyslogd. Starting periodic command scheduler: cron. Starting OpenBSD Secure Shell server: sshd. Debian GNU/Linux squeeze/sid landisk ttySC1 landisk login: