2.6.35.1-landisk再挑戦(その2)

　liloのログを見る必要が無いので、ボーレートを115200bpsに変更した。ログの文字化けが減り、見えなかったものが見えてきた。
　エラーの表示も変わった様です。
irq 40: nobody cared (try booting with the "irqpoll" option)
　↑これもでなくなりました。
　mitsuoさんのドライバ選択を真似させて頂いたので、マイクロドライブが、hda->sdaになっているのにやっとのことで気付く。（←遅すぎです。）
　liloのコマンドを修正して再起動してみる。

　相変わらず動きませんが、udevで止まっているみたいだ。

ﾁﾅﾁ5)ｽｽﾑE?ｵﾍ・)srrj=U9Q}I==Q}I=91eｵﾁﾁﾁﾁﾁﾁﾁﾅ5)srr5%M-}1Mｵﾁﾁﾁﾁﾁﾁﾁﾁ5)srrzI%}I==Q}Yｵﾁﾁﾁﾁﾁﾍﾁﾅ5)srrb=I}QeAｵﾁﾁﾁﾁﾁﾁﾁﾅ5)srrJ9%QI}MQIQｵﾁﾁﾁﾁﾁﾁﾁﾁ5)srrJ9%QI}M%iｵﾁﾁﾁﾁﾁﾁﾁﾁ5)k｡違ｹﾑﾉ蛩ｵﾍｭ眞ﾁﾁﾁ?Aｱ･ﾍ}ｵﾍｭ眞ﾁﾁﾁﾍﾁﾁﾁｹ}ｱ･?ﾍ5)kｵｽﾉ裨ﾙﾉﾅﾝ?ｽﾙﾕﾕﾍ??･ｱﾅﾙﾉﾕｱ｡ﾅ衙ﾁｭｭｽｹﾑ?ｱｱ??ﾝﾝﾕﾁ??ﾉﾁ%IEﾍ5)intc: Registered controller 'sh7750_dma8' with 9 IRQs
intc: Registered controller 'sh7750_tmu34' with 2 IRQs
intc: Registered controller 'sh7750_pci' with 8 IRQs
intc: Registered controller 'landisk' with 8 IRQs
Console: colour dummy device 80x25
 sh_tmu.0: used for clock events
 sh_tmu.0: used for periodic clock events
 sh_tmu.1: used as clock source
Calibrating delay loop (skipped)... 266.66 BogoMIPS PRESET (lpj=533333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: SH7751R
NET: Registered protocol family 16
PCI: Starting intialization.
bio: create slab  at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pci 0000:00:02.0: BAR 0: assigned [mem 0xfd000000-0xfd000fff]
pci 0000:00:02.0: BAR 0: set to [mem 0xfd000000-0xfd000fff] (PCI address [0xfd000000-0xfd000fff]
pci 0000:00:02.1: BAR 0: assigned [mem 0xfd001000-0xfd001fff]
pci 0000:00:02.1: BAR 0: set to [mem 0xfd001000-0xfd001fff] (PCI address [0xfd001000-0xfd001fff]
pci 0000:00:00.0: BAR 0: assigned [io  0x1000-0x10ff]
pci 0000:00:00.0: BAR 0: set to [io  0x1000-0x10ff] (PCI address [0x1000-0x10ff]
pci 0000:00:00.0: BAR 1: assigned [mem 0xfd002000-0xfd0020ff]
pci 0000:00:00.0: BAR 1: set to [mem 0xfd002000-0xfd0020ff] (PCI address [0xfd002000-0xfd0020ff]
pci 0000:00:02.2: BAR 0: assigned [mem 0xfd002100-0xfd0021ff]
pci 0000:00:02.2: BAR 0: set to [mem 0xfd002100-0xfd0021ff] (PCI address [0xfd002100-0xfd0021ff]
Switching to clocksource sh_tmu.1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
gio: driver initialized
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 121
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
SuperH SCI(F) driver initialized
sh-sci.0: ttySC0 at MMIO 0xffe00000 (irq = 23) is a sci
sh-sci.1: ttySC1 at MMIO 0xffe80000 (irq = 40) is a scif
console [ttySC1] enabled
loop: module loaded
scsi0 : pata_platform
ata1: PATA max PIO0 ioport cmd 0xc0000040 ctl 0xc000002c irq 10
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
PCI: Enabling device 0000:00:00.0 (0000 -> 0003)
8139cp 0000:00:00.0: eth0: RTL-8139C+ at 0xfd002000, 00:a0:b0:6c:e9:cd, IRQ 5
PCI: Setting latency timer of device 0000:00:00.0 to 64
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
PCI: Enabling device 0000:00:02.2 (0000 -> 0002)
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: Enabling legacy PCI PM
ehci_hcd 0000:00:02.2: irq 5, io mem 0xfd002100
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 7, io mem 0xfd000000
ata1.00: CFA: HMS360402D5CF00, DN2OC60G, max UDMA/33
ata1.00: 3999744 sectors, multi 0: LBA
ata1.00: configured for PIO
scsi 0:0:0:0: Direct-Access     ATA      HMS360402D5CF00  DN2O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3999744 512-byte logical blocks: (2.04 GB/1.90 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda:
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 8, io mem 0xfd001000
 sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI removable disk
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
mice: PS/2 mouse device common for all mice
rs5c313 rs5c313: rtc core: registered rs5c313 as rtc0
sh_tmu sh_tmu.0: kept as earlytimer
sh_tmu sh_tmu.1: kept as earlytimer
push-switch: version 0.1.1 loaded
TCP cubic registered
NET: Registered protocol family 17
rs5c313 rs5c313: setting system clock to 2010-11-29 10:30:37 UTC (1291026637)
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda3): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 96k freed
INIT: WﾗW・
           Ir2ｽｽﾑ･ｹ?H・Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...

　そういえばhda->sdaになったので、fstabも書き換えないといけません。書き換えて再起動！

ﾉﾁﾅﾁ5)ｽｽﾑE?ｵﾍ・)srrj=U9Q}I==Q}I=91eｵﾁﾁﾁﾁﾁﾁﾁﾅ5)srr5%M-}1Mｵﾁﾁﾁﾁﾁﾁﾁﾁ5)srrzI%}I==Q}Yｵﾁﾁﾁﾁﾁﾍﾁﾅ5)srrb=I}QeAｵﾁﾁﾁﾁﾁﾁﾁﾅ5)srrJ9%QI}MQIQｵﾁﾁﾁﾁﾁﾁﾁﾁ5)srrJ9%QI}M%iｵﾁﾁﾁﾁﾁﾁﾁﾁ5)k｡違ｹﾑﾉ蛩ｵﾍｭ眞ﾁﾁﾁ?Aｱ･ﾍ}ｵﾍｭ眞ﾁﾁﾁﾍﾁﾁﾁｹ}ｱ･?ﾍ5)kｵｽﾉ裨ﾙﾉﾅﾝ?ｽﾙﾕﾕﾍ??･ｱﾅﾙﾉﾕｱ｡ﾅ衙ﾁｭｭｽｹﾑ?ｱｱ??ﾝﾝﾕﾁ??ﾉﾁ%IEﾍ5)intc: Registered controller 'sh7750_dma8' with 9 IRQs
intc: Registered controller 'sh7750_tmu34' with 2 IRQs
intc: Registered controller 'sh7750_pci' with 8 IRQs
intc: Registered controller 'landisk' with 8 IRQs
Console: colour dummy device 80x25
 sh_tmu.0: used for clock events
 sh_tmu.0: used for periodic clock events
 sh_tmu.1: used as clock source
Calibrating delay loop (skipped)... 266.66 BogoMIPS PRESET (lpj=533333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: SH7751R
NET: Registered protocol family 16
PCI: Starting intialization.
bio: create slab  at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pci 0000:00:02.0: BAR 0: assigned [mem 0xfd000000-0xfd000fff]
pci 0000:00:02.0: BAR 0: set to [mem 0xfd000000-0xfd000fff] (PCI address [0xfd000000-0xfd000fff]
pci 0000:00:02.1: BAR 0: assigned [mem 0xfd001000-0xfd001fff]
pci 0000:00:02.1: BAR 0: set to [mem 0xfd001000-0xfd001fff] (PCI address [0xfd001000-0xfd001fff]
pci 0000:00:00.0: BAR 0: assigned [io  0x1000-0x10ff]
pci 0000:00:00.0: BAR 0: set to [io  0x1000-0x10ff] (PCI address [0x1000-0x10ff]
pci 0000:00:00.0: BAR 1: assigned [mem 0xfd002000-0xfd0020ff]
pci 0000:00:00.0: BAR 1: set to [mem 0xfd002000-0xfd0020ff] (PCI address [0xfd002000-0xfd0020ff]
pci 0000:00:02.2: BAR 0: assigned [mem 0xfd002100-0xfd0021ff]
pci 0000:00:02.2: BAR 0: set to [mem 0xfd002100-0xfd0021ff] (PCI address [0xfd002100-0xfd0021ff]
Switching to clocksource sh_tmu.1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
gio: driver initialized
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 121
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
SuperH SCI(F) driver initialized
sh-sci.0: ttySC0 at MMIO 0xffe00000 (irq = 23) is a sci
sh-sci.1: ttySC1 at MMIO 0xffe80000 (irq = 40) is a scif
console [ttySC1] enabled
loop: module loaded
scsi0 : pata_platform
ata1: PATA max PIO0 ioport cmd 0xc0000040 ctl 0xc000002c irq 10
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
PCI: Enabling device 0000:00:00.0 (0000 -> 0003)
8139cp 0000:00:00.0: eth0: RTL-8139C+ at 0xfd002000, 00:a0:b0:6c:e9:cd, IRQ 5
PCI: Setting latency timer of device 0000:00:00.0 to 64
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
PCI: Enabling device 0000:00:02.2 (0000 -> 0002)
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: Enabling legacy PCI PM
ehci_hcd 0000:00:02.2: irq 5, io mem 0xfd002100
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 7, io mem 0xfd000000
ata1.00: CFA: HMS360402D5CF00, DN2OC60G, max UDMA/33
ata1.00: 3999744 sectors, multi 0: LBA
ata1.00: configured for PIO
scsi 0:0:0:0: Direct-Access     ATA      HMS360402D5CF00  DN2O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3999744 512-byte logical blocks: (2.04 GB/1.90 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda:
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 8, io mem 0xfd001000
 sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI removable disk
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
mice: PS/2 mouse device common for all mice
rs5c313 rs5c313: rtc core: registered rs5c313 as rtc0
sh_tmu sh_tmu.0: kept as earlytimer
sh_tmu sh_tmu.1: kept as earlytimer
push-switch: version 0.1.1 loaded
TCP cubic registered
NET: Registered protocol family 17
rs5c313 rs5c313: setting system clock to 2010-11-29 11:25:03 UTC (1291029903)
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda3): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 96k freed
INIT: WﾗW・
           Ir2ｽｽﾑ･ｹ?H・Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...done.
Setting the system clock.
Activating swap...Adding 125048k swap on /dev/sda2.  Priority:-1 extents:1 across:125048k
done.
EXT3-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda3): using internal journal
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...done.
Checking file systems...fsck 1.41.8 (11-July-2009)
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...Ignoring unknown interface eth0=eth0.
done.
CR*
   ･Q
      ?ｹﾉﾕｹｱ?ｱ鯔ｿｨH・Starting enhanced syslogd: rsyslogd.
Starting periodic command scheduler: cron.

Debian GNU/Linux squeeze/sid landisk ttySC1

landisk login:xxxx
Password:
Last login: Mon Nov 29 11:23:53 UTC 2010 on ttySC1
Linux landisk 2.6.35.1 #4 Sun Nov 28 11:59:33 UTC 2010 sh4

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
landisk:~#

　起動しました。感動です！！

>elijahさん
　ソースの提供や、同一コンフィグでのテスト、その他
　ありがとうございます。
>mitsuoさん
　115200bpsの件、発言がなけばここにたどり着けませんでした。
　ありがとうございます。